Environmental Laboratory High Temperature Test Chamber Display Accuracy 0.1 °c

High temperature test chamber JD-8002-200

Box knot

Structure size

1, inner size: 450 (width) × 400 (deep) × 400 (height) mm

2, the outer dimensions are about: 720 (width) × 590 (deep) × 1020 (height) mm + 110 casters,

whichever is the real thing;

3. Operation panel: The control panel is located above the machine table;

4, open the door: single door from right to left;

5, can be window: the door with a window, specifications W200 * H250mm;

6, the inner material is: 430 # mirror steel plate, thickness 1.0mm;

7, the outer material is: cold-rolled steel plate, thickness 1.0mm. Powder paint treatment (bei white);

8, compartment: inside the second layer, with two stencils;

9, the insulation material is: glass fiber rock wool, good insulation effect;

10. The sealing material is: high temperature resistant foamed silicone strip;

11. The machine is equipped with brake movable casters;

12. The overall structure is floor-standing.

Temperature control

system

1. The temperature control is PID digital display instrument (Taiwan Taisong EM705), single-point temperature control, automatic calculation, PV/SV simultaneous display, button setting;

2, timing function: 1-9999 (optional setting hours, minutes, seconds) temperature to the timing, time to stop heating power supply, and alarm prompt;

3. Temperature sensing line (K) type;

4, the output is 3-32V;

5. The current controller is: SSR solid state relay;

6, the heating material is: high temperature heating tube;

7, temperature range: room temperature +20 ~ 200 °C temperature adjustable:

8, heating rate: 100 ° C about 15 minutes;

9, control accuracy: ± 0.5 ° C;

10, display accuracy: 0.1 ° C;

11, temperature deviation: RT + 20 ~ 200 ° C ± 2.5 ° C. (no-load test)

Air supply

system

1. Air supply mode: internal horizontal air supply circulation;

2, the motor is a special type of temperature resistance, motor power 370W / 50Hz;

3. The fan is 7.5-inch multi-blade turbine type;

4. The air inlet is on the right side of the machine and the air outlet is on the left side of the machine.

power supply

Device

1, voltage AC 220V/50Hz single phase

2, current 16A

3, power 3.5KW

1. Over-temperature protection system: When the temperature is out of control, when the over-temperature protection set temperature is exceeded, the heating supply is automatically stopped, thus protecting the safety of products and machines;

2. Circuit protection system: grounding protection, fast insurance, etc.